925.373.3496
Call for an Estimate!

Superior Stucco Acrylic Bonder

Permanently Bonds New Cement/Stucco to Existing Cement/Stucco
For Use on Interior or Exterior Plaster, Cement and Painted Surfaces

Download Superior Stucco Admix 2000 Spec Sheet

DESCRIPTION:

SUPERIOR STUCCO ADMIX 2000 is a medium, viscous, low odor, acrylic polymer modified matrix used to fortify cement mortar mixes. SUPERIOR STUCCO ADMIX 2000 Increases mortar strength, water resistance, superior adhesion and UV protections, as well as offering superior versatility in many cement based mortar mixes. SUPERIOR STUCCO ADMIX 2000 works well with One-Coat applications, exterior Stucco, Terrazzo, patching and concrete resurfacing; delivering durability, strength and decreases surface degradation, especially on thin applications like Stucco.

APPLICATIONS:

Take care that all surfaces are clean and suitable for application. HOT SURAFCES SHOULD BE COOLED DOWN BY MISTING WATER ON SUBSTRATE PRIOR TO APPLICATION, Saturated, Surface, Dry ( SSD) procedure is recommended.

Stucco Finish, Terrazzo and Mortar: Mix One (1) part SUPERIOR STUCCO ADMIX 2000 to Three (3) parts water (1:3). This will improve adhesion and reduce cracking. Use straight with concrete compounds for deep patching base.

One-Coat Stucco: Mix One (1) part SUPERIOR STUCCO ADMIX 2000 to One (1) part water (1:1), then add to sand/cement mixture and mix normally.

COVERAGE:

The coverage of the SUPERIOR STUCCO ADMIX 2000 will vary due to job conditions, method of application, and weather conditions. Typically (1) Gallon of most of the SUPERIOR STUCCO ADMIX 2000 will cover approximately 200-300 sq. feet (5 Gallons: 1,000-1,500 sq. ft) Yields will vary depending on dilution rate and porosity of substrate.

STORAGE:

The SUPERIOR STUCCO ADMIX 2000 should be stored in a cool, dry place out of direct sunlight. Keep above 40 degrees F and below 110 degrees F.

LIMITATIONS:

Do not apply SUPERIOR STUCCO ADMIX 2000 when the temperature is below 40 degrees F or above 100 degrees F. This range of temperature must be kept for 48 hours to ensure proper curing. Keep away from hydrostatic pressure (Moisture/water) after applying SUPERIOR STUCCO ADMIX 2000. Do not apply until surface is free of all contaminates. Please refer to the individual SUPERIOR STUCCO product for detailed information.

CLEAN UP:

Clean up with water immediately. DO NOT ALLOW TO DRY BEFORE CLEAN UP.

GUARANTEE

The above statement, recommendation, suggestions and technical data are based on the best knowledge to Stucco Supply and is given as information only, without any responsibility for their use. Stucco Supply makes no warranties or guarantees to this product, either expressed or implied with respect to merchantability or fitness for particular use of said product. Handling and use of product are out of the control of Stucco Supply, so no warranty is given.

Request a Quote

Get the Stucco product that is right for you.

What Sets Us Apart

  • Since 1955
  • Family Owned Business
  • Custom Orders Available
  • Delivery to Most Job Sites
  • Contractor's Pricing for All
  • Leading Stucco Manufacturer
  • Highest in Quality and Service