Exterior Superior Stucco in the Greater Bay Area
DESCRIPTION:
Manufactured from the highest grade-materials, EXTERIOR SUPERIOR STUCCO
provides the dependablity, flexabilty in design, and low maintence that
is demanded from an exterior coating. EXTERIOR SUPERIOR STUCCO creates
an apperance that is only limited to imagination.
16/20
stucco is manufactured with our largest aggregate mix. It is the perfect
choice when you are looking for a rough texture.
20/30
stucco is manufactured with a medium graded aggregate blend. With this,
you can create a look that is either semi-rough or semi-smooth.
Smooth Coat
is produced with the finest aggregates, and is a wonderful choice when
a smooth finish is desired. There are may possibilities with textures
and, again, imagination is the only limiting factor when creating the
look you want.
BASIC USES:
EXTERIOR SUPERIOR STUCCO is for use as a finish coat with a complete stucco system.
COLOR:
Choose from any of our 30 stock colors, that can be found on our color
chart or let us create a custom color that meets your needs. We also have
an extensive archive of custom colors that have already been formulated.
PACKAGING:
EXTERIOR SUPERIOR STUCCO is packaged in a moisture resistive, 90 lb (40.9 kg) bag.
COVERAGE:
All coverages are approximate per bag.
16/20
Sand Finish
|
20 yards |
16/20
Texture
|
10-15 yards |
20/30
Sand Finish
|
20 yards |
20/30
Texture
|
10-12 yards |
Smooth Coat |
10 yards |
MIXING:
Use clean, potable water, and mix in a paddle type mixer for a minimum
of 15 minutes. This will ensure that all materials are mixed properly.
WATER AMOUNTS PER BAG:
16/20 |
3.25 gal |
20/30 |
3.25 gal |
Smooth Coat |
3.5 gal |
SURFACE PREPARATION:
To ensure the the EXTERIOR SUPERIOR STUCCO bonds correctly, clean the receiving
surface of any dust, debris, efflorescene, and/or oils. Also, correct
any irregularties in the surface that the finish will be applied to. Make
sure that all surfaces will absorb water evenly. Just prior to application
wet down all surfaces that will receive the EXTERIOR SUPERIOR STUCCO being
careful in avoiding saturation.
APPLICATION:
Apply the finish to the pre-wetted surface using a hand application method,
or a mechanical method. It is imperative that all applications are started
at a corner and ended at the opposing corner. This will help prevent any
cold joints within a wall section. We recommend that Smooth Coat be covered
with an Elastomeric paint to cover any discoloration and/or cracking that
is inherent to all smooth finish textures.
MAXIMUM THICKNESS:
16/20 |
3/16 inch |
20/30 |
3/16 inch |
Smooth Coat |
1/8 inch |
CURING:
Lightly mist all walls with water within 24 hours after application is
complete. Smooth Coat does not require this curing metod.
CURING TIMES:
16/20 |
28 days |
20/30 |
28 days |
Smooth Coat |
28 days |
LIMITATIONS:
DO NOT apply EXTERIOR SUPERIOR STUCCO when the ambient temperature is below 40 deg
F /4 deg C or above 100 deg F / 34 deg C. The ambient temerature must
stay consistenly within this range for a minimum of 48 hours after application.
This allows the finish to properly cure.
DO NOT apply EXTERIOR SUPERIOR STUCCO if there are contaminates on the receiving
surface. Contaminates may include, but are not limited to, dust, debris,
efflorescene, and/or oils.
DO NOT add any more water than what is prescribed when mixing the product. Excessive
or insufficent amounts of water can cause failure.
DO NOT add any other materials to the mixture of the product without written
consent of STUCCO SUPPLY.
DO NOT saturate the wall during preparation and/or water curing.
DO NOT use excessive amounts of water when floating and/or troweling the texture,
as this may cause product failure.
DO NOT deviate in mixing procedures as this may cause product failure.
CLEAN UP:
We recommend that all surfaces and tools be cleaned immediately with water.
TESTING AND STANDARDS:
ASTM C-150/C-926
Portland Cement
ASTM C-144/C-897
Sand
ASTM C-206 Type S Lime
UBC 47F Mixture.
NOTE:
Because of job conditions, which are beyond our control, our liablity is
limited to refund of the purchase price of the material.
CAUTION:
This product may cause skin irritation. Use protective clothing or prevent
contents from coming in contact with skin. Use non-toxic particle mask.
All information in this technical data sheet is designed and compiled according
to the latest technology and is intended as information only. No liablity
can be accepted for this information.
For additional information,
please contact STUCCO SUPPLY.
STUCCO SUPPLY
COMPANY OF SAN JOSE
1601 LITTLE ORCHARD ST
SUITE E
SAN JOSE, CA 95110
PHONE: (408) 292-0454
TOLL FREE: (800) 292-0454
FAX: (408) 292-3872